<tbody id="rgahh"></tbody>
<nav id="rgahh"><sub id="rgahh"></sub></nav>

服務熱線:136-9869-3887
歡迎光臨青島北方天宇工程材料有限公司網站!
承重型

3mm高承重型地面轉角

發布日期:2018-02-01|變形縫生產廠家小編
分享到:

室內樓地面變形縫的做法

  承重型樓地面變形縫F-WDM(轉角)也稱為金屬蓋板型樓地面變形縫,是FDM平面型延伸的產品,主要用于FDM平面同一伸縮縫L型部位,設立的轉角型可以保持與平面FDM產品同一高度和邊距。

  承重型樓地面變形縫F-WDM(轉角)建筑變形縫裝置產品特點:

  接合平整,增加蓋板厚度,提高承載能力蓋板自定中心,現在公司有內高3mm-12mm的鋁合金基座,也可定做加工特殊加大加厚承重型鋼板基座。

  面板可選用鋁合金、不銹鋼,表面可以開鑿防滑槽。

  FSM,FHM通??蓾M足1T,2T車輛通行;FDM通??蓾M足3T,5T車輛通行,遇到大巴和重型車輛通行要根據縫口寬度確定面板厚度。

  采用滑桿確保變形縫裝置變位時仍能保持中心及原有位置。

  樓地面變形縫承重型型號:FDM、FHM、FSM、F-WSM。

  承重型樓地面變形縫F-WDM(轉角)產品圖片如下圖所示:

  承重型樓地面變形縫F-WDM(轉角)伸縮縫裝置是用來遮蓋和飾建筑物變形縫的建筑配件,是由鋁合金基座、鋁合金板(或不銹鋼板、黃銅板)、不銹鋼滑桿等組成的集承重性和裝飾性于一體的工業化產品。產品廣泛適用于廠房、道路、停車場等需要重型車輛的伸縮縫部位。

The load-bearing floor deformation joint F-WDM (corner) is also known as the metal cover type building ground deformation joint. It is a product of FDM flat type extension. It is mainly used for the L part of the same expansion joint on the FDM plane. The rotary form can maintain the same height and edge distance with the flat FDM product.

The characteristics of the deformation seams of the F-WDM (corner) building of the ground deformation seam of the bearing type building:

The joint is smooth, the thickness of the cover is increased, the load capacity is increased, the cover is self centering. Now the company has an aluminum alloy base with a high 3mm-12mm and can also be made to make special thickening and load bearing steel plate base.

The panel can be made of aluminum alloy and stainless steel, and the surface can be chilled for antiskid groove.

FSM, FHM usually meet 1T and 2T vehicle traffic; FDM can usually meet 3T and 5T traffic, and when buses are encountered, the thickness of the panel should be determined according to the width of the seam.

The sliding rod is used to ensure that the center and the original position of the deformation joint can still be maintained.

The heavy-duty models of ground deformation and seams: FDM, FHM, FSM and F-WSM.

The F-WDM (corner) product picture of the ground deformation seam of the load-bearing building is shown as shown in the following figure.

F-WDM deformed joints bearing floor (corner) expansion joint device for sewing accessories and decorative cover construction deformation of buildings, is composed of Aluminum Alloy base, Aluminum Alloy board (or stainless steel plate, stainless steel, brass) sliding rod composed of bearing set decorative and industrial products in one. The products are widely used in the expansion joints of heavy vehicles, such as factories, roads, parking lots and so on.

 

上一篇:沒有了
[返回列表]
地址:山東省青島市城陽區黑龍江中路305號????吳經理:136-9869-3887??
Copyright © 2002-2017 xx工程材料伸縮裝置有限公司,變形縫廠家 版權所有
技術支持:九魯網絡 合作伙伴:木材破碎機
2018全年四句诗码料 连山| 保定市| 巫山县| 石阡县| 渝中区| 夏河县| 高阳县| 建湖县| 仙游县| 泰顺县| 南漳县| 长治市| 南雄市| 四子王旗| 志丹县| 大港区| 明水县| 阆中市| 福鼎市| 沧源| 梅州市| 寿阳县| 科技| 文化| 瑞丽市| 莎车县| 沙湾县| 湖北省| 巩义市| 双鸭山市| 平利县| 武义县| 横峰县| 孟津县| 竹山县| 成都市| 定结县| 察雅县| 台南市| 宁晋县| 白沙| http://m5.lsjt4e.pw http://www.lsj64t.pw http://500.kk7ug0.top http://www.ableinternet8.cn http://wap.lsj2q3.club http://tv.kagp8w.top